Are you looking for a full roof restoration in Melbournes Western suburbs? Our qualified tradesman can restore your roof back to it’s former glory without the expense of a new roof.


All About Roofs- Roof Restoration Process

After thoroughly inspecting the property and discussing the options with you, if a roof restoration is the best course of action, All About Roofs Restoration Specialist will carry out the following processes:

  • Remove all broken roof tiles and replace using a similar age and type tile

  • Pressure clean the entire roof area from top to bottom using 3000psi of straight water pressure using a turbo type nozzle

  • Clean out all surrounding gutters and wash down all external walls and paths affected by roof grime

  • Remove all badly rusted valley irons and replace with new and treat all others

  • Repair or replace lead flashings or damaged timber battens, also installation of quality extras such as ventilation kits

  • Strip off all existing ridge capping tiles and gable end verge tiles and completely re-bed or re-bed where required as specified

  • Re-point all ridge capping and gables using the Flexi-Point Ridge Bond

  • Inspect repairs and air-blow clean the entire roof area in preparation for the coating system

  • Apply 1-2 coats of a selected masonry sealer dependant of the tile age and type, using the Air-less spray system

  • Apply 2 separate coats of a high quality pure acrylic roof tile coating in your selected colour using the Air-less spray system.

  • Hand paint all gables and flashings to avoid any over spray. Clean up and remove all residue from site

  • A final inspection and job report is performed by the supervisor


Roof restoration Service Area

We have provided roof restorations all across Melbourne Western Suburbs, and regularly restore roofs in Williamstown, Werribee, Hoppers Crossing, Lara and Altona.